Scava raccogli patate nuovo Bomet Z656/2 przenośnikowa 2 rzędowa Upus

Upus conveyor diggers (2-row) are machines suspended on the three-point linkage and powered by the tractor's PTO shaft. The diggers are designed to be mounted on a tractor equipped with a Category II and III suspension system.

As a result of the movement and shaking of the belt, the ridge is crushed and the soil is poured through the conveyor rods, while at the same time the excavated plant tuber/root is transferred to the rear of the machine.

At the back of the digger, appropriately profiled chute grates are used, which direct the dug potatoes to the ridge behind the digger. The chute grates allow you to place the excavated tubers/roots of the plant in such a way that it will eliminate the possibility of damage to the tuber/root by the tractor tires during the next pass.

The machine can be used on plantations with inter-row widths of 62.5 - 67.5 cm and 70 - 75 cm.

Specifications:

Machine Symbol: Z656/2

Number of dug rows: 2

Interrow width: 70-75cm

Number of sieving belts: 2

Machine weight: 860kg

Power requirement of the tractor: 40kW/55KM

Tape with rubber lagging

Additional equipment:

Ploughshare to vegetables: 1320PLN

Articulated-telescopic shaft: 600zł